I’ve used it about 2 years now. I have both Jellyfin and even had Invidious for a while. I don’t even know it was against any terms until right now.

Well luckily for us all it’s not :-)

Most ISPs (especially smaller ones it seems) just run a basic DHCP server with leases expiring at a set interval. As long as your stuff is on and working when the lease renews, you’ll pull the same IP forever.

Dang. Not the company I was hoping.

If they’re using an eero router, I’m going to assume you’ll just have an ethernet cable from an ONT then into the router. Ask the installer if you need to use the eero or can you install your own router. That may alleviate some of your concerns.

I work for an ISP and self host. I have more things in place to track my usage than any ISP would put just because I make myself the guinea pig for new equipment and want to know exactly what is happening. You will never use a full 8 gig (at least as of now, obviously in the future that will change). If the extra money isn’t an issue do it, but if you can “girl math” the $30 price difference, stick with that for a year and spend the extra $360 you saved on multi-gig networking equipment, that’s what I’d do.

Yes please. What is QRD? Don’t need much details, just a quick intro.

Going from 100 Mbps to even a gigabit, if you’re self hosting, is going to be a huge difference. If you want my opinion, save yourself some money, go with the lowest speed over a gigabit and gradually buy equipment with the money you’d save compared to the 8 gigabit plan.

As for the router, can you either send a picture of it from the ISPs website or name the ISP? With 8 gig being the maximum, you’re going to be on XGS PON and I have a hunch I know what equipment you’re getting, but want to make sure I’m right.

I’ve had Jellyfin and Plex running using the same media directory for a couple years now. I think I had to make a couple small changes for things like seasons of a TV show to show up correctly, but nothing incredibly difficult. Definitely worth setting up and playing with periodically so when you do finally get sick of Plex, you’re ready to just switch.

Only thing I use Plex for exclusively now is when I’m flying, Plex has the Netflix style download option and Jellyfin just downloads the video file. I like Plex’s way better just from personal preference.

So the problem with thin margins on the hardware side is what’s stopping a user from just installing their own OS once they figure out they can do the same thing you’re doing on the same hardware?

Where do you get a 12 tb drive for $100?

Living in the Midwest, I’ve never really dealt with a major power outage we didn’t expect. Power company will send out a (very rare) notice if they are doing anything that might bring down power and usually if a thunderstorm starts to get rough, we shut down anything important so power flicker/surges don’t hurt it.

The big key is your hardware needs to support it. Back when “unified SSIDs” became a thing, some older 802.11n (WiFi 4) and ac (WiFi 5) devices could do it, but it was…. Weird.

If you have a newer router, especially WiFi 6 or 802.11ax it should be be to do the unified SSID.

You know how routing works, but not wireless networks apparently.

Mainstream NASs (like Synology and QNAP) are very good at what they’re built for, which is be available on the network and have plenty of storage.

They CAN do more, but then you start to notice the limitations. It is still “just a NAS.” It’s not called a NASAHVAVMM (Network Attached Storage and Hypervisor and VM Manager)

If you want to do what you described, a smaller NAS would probably be good for backups, but look into a fully fledged, capable server too.

Have you looked up raspberry pi magic mirror projects?

You don’t have to use a a mirror, but just a pi and an old monitor mounted on the wall would probably accomplish everything you need.