Illecors

Mostly agree. Audiobooks are not my thing, but of it were - I’d look for a way to resume where I left off, maybe some recommendation on what to listen to next.

In general - once you’re into hosting stuff and past the initial barrier of setting everything up - adding another service is dead simple.

Can I be unreasonable? I’m gonna be unreasonable.

Gentoo.

.dev domains are required to only be reachable via https. You’ve not mentioned that in the post, so I’m guessing port 443 is not serving or even listening.

I’d delete the screenshot with your IP visible. You never know…

Majority of openrc/hardened/selinux binhost setup is done, need to figure out the small things.

Lemmy was also giving a bit of a headache, fiddled with limits some more.

I’m fairly certain there’s been an attempt to play with some opnsense config, but there was only time to install the updates. Or maybe this was last week 🤔

Whole path has to be accessible, not just the file itself. All dirs above the file need to have the executable bit set that affects the user accessing the file.

Lemmy.cafe checking in

I’ve not read all of it, but if you’re referring to the stuff at the beginning - none of those limitations apply to 5700xt.

If you mean something else - then, naturally, I would ask if it actually affects your media in the first place. It might, but I wouldn’t expect that.

I mean if you’re keeping the GPU - you can just set jellyfin to use VAAPI and utilise the gpu that way.

• https://trac.ffmpeg.org/wiki/Hardware/VAAPI
• https://wiki.gentoo.org/wiki/VAAPI
• https://wiki.archlinux.org/title/Hardware_video_acceleration#Configuring_VA-API

in case you want to tell me what I have is fine and I don’t need an upgrade

What you have is fine and you don’t need an upgrade 😁

But we’re not looking for fine, are we? :)

I would keep the gpu and get as many cpu cores and ram as my budget allows. Once you cross into “stupid amount of RAM” territory you can start utilising tmpfs for transient things such as jellyfin transcode directory to:

• preserve those precious ssd writes (not really relevant anymore)
• make it more efficient (feels-good kind of relevant)
• running a filesystem in ram is really cool (most relevant, naturally :D)

No, comercial IPs are fine. You’ll have trouble with some of them - Digital Ocean is a notorious example - where the provider itself blocks outbound port 25 and there’s nothing you can do. I think DO only does that for new accounts.

I myself am running it on Linode - it did get purchased by Akamai a couple of years ago, so I can no longer blindly recommend it - but so far it’s been working fine. One thing I did recently discover was the ability to request a /56 block on Linode - my pre-assigned IPv6 got blacklisted somewhere as at least the whole /64 and simply generating another IP from the same /64 did not help. Getting a fresh block solved it for me, though, and now I know that if this /56 gets blacklisted - it’s my fault. Unless, of course, I get caught up in a /48… 😳

You won’t be able to host email on a residential IP - all of them are on a permanent blacklist. I understand the money argument - and it’s a real argument - but host your own email is just so cool!

Precision guesswork here, but I’ve had nginx (not on opnsense) redirecting me to the default host quite a few times recently - all times it was me cocking up its config. It could be that nginx is waiting for the actual target until it times out and then just gives a your opnsense gui as the most reasonable response.

I’d start checking its config. Or pasting it here, after removing secrets, it any.

Dunno, worked well for me. Give it a shot and see if anything needs to be disabled.

I’d been running OPNsense in a VM for some time. I used xen as a hypervisor, but that shouldn’t really be a requirement. Passed the nics through and it was golden! All the benefits of a VM - quick boot-up, snapshots on the hypervisor - it’s truly glorious :)

I don’t have your requirements, but nextcloud with Memories works well enough for me. Nextcloud does the file things, including auto upload from phones. Memories then displays those photos.

NFS comes to mind, naturally.

I remember some years ago scp had a big issue, can’t recall what, though. But that made me have a look at rsync, and I’ve been using that ever since. Flags are a bit atteocious, but I’ve aliases rsync -avz status=progress to copy and it’s been happy days. One other benefit - incremental copy. Helps in cases where a copy procedure had been stopped for whatever reason.

I did mean your android system. I’m not on jellyfin, yet, so not familliar with uts quirks.

Does importing the ca not help?

This is ridiculously good :D

What is a recommended SSD nowadays? I don’t really have a criteria other than avoiding the noise - sata works well enough for me.