Not all of these mini PCs have a wifi card in them even if they have the antennas for it. You might start by opening it to check whether the wifi antennas are connected, or whether you need to add a WiFi card.

I think OPNsense would do what you’re looking for. I use it on a mini PC as my router, and it’s great, but I have not used it for WiFi (I run a separate access point). The limitation is WiFi hardware support. You will need to make sure your mini PC’s WiFi card has a driver in FreeBSD. Intel hardware is often a better bet than Realtek etc.

https://docs.opnsense.org/manual/how-tos/interface_wireless_internal.html

They do have categories, via the menu at the top:

https://openalternative.co/categories

I know you don’t want to pay for their sync service and this is the self-hosted community, but I just wanted to note that they service does work well and gives you access to note history. I decided to pay because Obsidian is excellent and I wanted to support it. I just wish it were open source.

$20 per month would be enough to discourage me. It’s another relatively costly computer-related subscription and I already feel like I’m losing a battle to keep those minimal. There would have to be some very clear benefits for that price.

Once the company goes out of business (or they focus on a different business) they tell you to get your tires or they will be discarded if you don’t. So you have to get them from them and you stop paying for the storage.

That’s where there’s no analogy for media purchased through streaming services. When streaming services withdraw content, the analogy would be the tire shop sending you an email saying “Just so you know, we’re burning your tires next week. No, you can’t come and get them.”

If the backup HDD was the only copy, it was an archive and not a backup, and you also need backups of the archive.

The only difference between Steam and the streaming companies is that Steam seems to have managed to create a lasting profitable business. If this changed and Steam faced more challenges, they’d put the screws on the users just like the TV and music services do.

OPNsense is excellent. You can run it on a cheap mini PC with multiple Ethernet ports and it makes a great router. I run several VLANs through it.

Edit: It’s based on FreeBSD, not Linux, in case that matters to you.

The N100 has a reputation for decent performance and good power efficiency at a cheap price. It’s a basic quad core CPU with only efficiency cores (no performance cores) and no hyperthreading, but it comes with modern codec capabilities. It will certainly give you more power than a Raspberry Pi for everyday tasks, but don’t expect to do anything too demanding with it. If your needs are basic an N100 mini PC seems like a good option.

I just found the general combination of security - mindedness and cheap Chinese hardware curious / amusing.

I think it can make sense, since there are so often vulnerabilities in consumer router firmware, and because those devices are so common the vulnerabilities are profitable to exploit. Running a BSD-based router on a cheap Chinese PC is likely to be better security for the router’s OS and software itself, even if you don’t know for sure about the firmware on the board (which you don’t with consumer routers either, really). Overall you could still have reduced your attack surface compared to a popular consumer router.

I use one with 6 LAN ports and a fanless 10th gen i5 running OPNsense, and it has worked well for years. It runs many services including Unbound DNS and Suricata with capacity to spare. It’s much better than any consumer router, though I run WiFi separately with an Asus AI Mesh set to AP mode.

The only concerns are that you don’t get BIOS updates, and you don’t know for sure that there’s nothing nasty in the firmware. But then you don’t really know that on consumer routers either.

I run a fanless mini PC with OPNsense and it’s by far the best router I’ve ever had at home. I can keep traffic separate in different VLANs, configure my own firewall rules, run a recursive DNS resolver and use Suricata for intrusion detection and blocking. It cost a bit more upfront but it has been worth it. Instead of attempting WiFi on the OPNsense box I added a consumer WiFi mesh router in access point mode, but any old router would do for this.

I haven’t used PFSense, I’m afraid. There’s a fairly recent comparison here:

https://homenetworkguy.com/review/detailed-comparison-between-opnsense-and-pfsense/

I like Joplin too, and I use it when I can instead of Keep. It supports a pretty good range of synchronization mechanisms. But it doesn’t have the collaboration capability of Keep, so when I’m doing shared shopping lists or to do lists, I still end up using Keep.

I use OPNsense on a reasonably cheap mini-PC with 6 ethernet ports that I bought from AliExpress. You can do a lot with OPNsense. For wifi I could have added a wireless card, but to avoid any potential driver issues instead I just plug in a wireless router set to Access Point mode.

How much this kind of setup costs depends on what kind of hardware you buy. If you stick to the minimum spec for OPNsense and buy a cheap wifi card or a used wifi router from eBay, you won’t need to spend too much.

Yes, that kind of thing. I can’t guarantee it will work but I’ve had good luck with Intel cards in the past. You can get 4-port ones too.

You can buy multi-port Intel ethernet cards cheap on eBay. But a used one and drop it into your computer. If you stick to Intel you should have a better time with driver support under OPNsense, and it would enable you to have separate ports for VLANs if you wanted to get fancy.

There’s this company, which makes ebook readers that don’t seem to be tied to any particular vendor:

https://shop.boox.com/collections/all

They have so many models, though, that I have no idea where to start with them.

Tor exit node, public Lemmy instance.

Yes, I really need to do this too. It’s a fairly daunting task because my significant other is not at all comfortable with even slightly complicated operations on a computer. I need to figure out a way to make a really easily accessible backup of everything.