The_Pete

Depends if you want to assign IP addresses or not. If you don’t, you just want your own section of the same lan, I.e.all your devices connected to your router but let dhcp pass through then you can just set itnup as an extender

You need an OS app to run and a setting in the BIOS. The app at the OS level gives a heartbeat to the watchdog module on the mother board. If you miss some heartbeats, the firmware on the motherboard sends the reset command.

No, this is a tool that can be used in a well designed architecture. Would I do this with a single database server, probably not. Would I ever run a single database server? Also probably not.

Also, by this point, you’ve probably already kernel panicked or something. There’s not much left that can be saved and you probably needed that backup five minutes before the host came up.

Check if your motherboard has a watchdog function. If the OS can’t ping the watchdog every 5 min or whatever you set it to, the board resets.

Myrecommendations is probably to host a next cloud instance. Does all the standard ‘cloud stuff’. File, contact, calendar sync, plus a bunch if other stuff if you want to add it via plugins. If you’re patient, and a single use you can host it on basically anything. If you decide you want to add users or have a faster site, you can go down the route of sorting out faster hardware or better specs and suck.

So they can read your code and use it for copilot

Lol, this is peak selfhosted. The obvious solution is to get a router/DHCP server that is normal enough to push out two DNS servers.

The selfhosted way is to set of keep alived or a load balancer, because why the fuck not.

A Yes, if you know what you are doing. Here is chat running live to show it can be done: https://fruitchattest.click/client.html

Lol, how helpful. Also no clients so basically a non starter for almost everyone.

What makes this any better than IRC?

Yeah, kbin seems to be a php8 service vs a compiled rust service from some lite poking.

Yes, this is called split horizon dns, basically, you have to control the DNS servers.

First, make a forwarding/resolver/cache, tell it to forward all requests for your_domain to your internal authoritative DNS server, it will return your internal IPs, externally though, when that domain is looked up, it will return the public ips of that host.

I don’t think signal supports sms any longer. I’m switching to matrix because of that.