If this is all happening wirelessly, that could be your problem. Looks like you have a 4g modem with a built in router. Is anything in the aar stack connected to the router through Ethernet, or is everything using WiFi? Try hooking the laptop up to one of the lan ports on the back of your router, see if that helps things.

Could also just be all the aar apps doing their thing for the first time, pulling from databases, downloading cover art, etc. once your library is all set up, they should calm down. Only way to really check this is to log into your router and see who the loudest talker is.

Watch some YouTube channels like Jeff Geerling or Hardware Haven. They along with others, made the daunting task or self hosting manageable for me. Great tips with helpful pointers, and they lay things out fairly well, on their videos and their websites.

Hopping in here to mention Proxmox Helper Scripts . They have many scripts that help you set up LXCs with software you may be using, including the full aar stack.

I tend to test things in a dedicated new VM, to get a feel for it, make sure I need to add it to my permanent services. If it does, I try to find a way to run it via LXC, and if that is too complicated/won’t work, I have a dedicated docker VM I throw it on. Everyone will answer the “LXC/VM/Docker” question differently, and they will all be correct. What is easiest for you is the right way.

I run a VM with opnsense as my network firewall. Moved it from a hardware install. I don’t see any issues, and there are loads of times it’s saved my ass having it backed up as a VM.

Slam as much ram as you can afford/fit inside the computer too. Every time I think I have enough, I always find I have need/use for more.

I use the caddy plugin in opnsense. Used nginx proxy manager from Proxmox helper scripts before that, which was relatively easy and helped me understand the whole proxy thing. Moved to caddy on opnsense a few months ago, just because, and have had no good reason to change yet.

I’m trying to figure out what the ML does. I’m pretty sure it does image recognition and helps with searches. I don’t really need it, but I’ve got the graphics cards just sitting there not doing anything. I’ve also thought about splitting the Nvidia p4 in my main server, since it’s supported by grid, and that would solve my issue as well. We will see what I feel up to trying today.

Thank you. I knew I was overthinking it. I know I was being vague, wasn’t sure how much info is too much info when it comes to troubleshooting networking.

Plex, unfortunately, is the best answer for this right now. Easiest to set up and maintain, the client apps are fine, you may have to fiddle with the Apple TV to be pain free though.

I have a few raspberry pi’s with kodi running and linked to my media served over nfs, which works well, just not as polished and fast as plex.

Personally, as soon as the Apple TV client gets fixed for Jellyfin, will probably drop plex altogether. The iOS app is stellar so not sure why it hasn’t been ported yet. I also have an easier time with my media playback with Jellyfin over plex, and you don’t need to pay for good hardware transcoding, it’s just the ui is so god awful!

Was the first car you drove a Lamborghini or an f1 car? K.I.S.S. Is definitely a good thing when learning. If it works and does what you need it to, then use it till you learned how it works and want to try the next challenge.

I thought whisper was hallucinating huge chunks of text in that medical transcription app. Is it more reliable with smaller chunks?

I did this a few years ago with a stack of pi 4s connected to a four port PoE switch. One was an openWRT router, one was a plex server connected to some spinning discs via usb, and I had another you could plug an hdmi cable into and use to view the media. I eventually found out I could host the whole thing on a single pi, but it was still a fun project. Could probably do it all on a pi 5 with an nvme hat no problem. Might look into that when I get the spare tinkering money.

deleted by creator

Any old Dell desktop/workstation/server should reach those specs. Poweredge rX30 and up, precision XX20/30 and up or optiplex (don’t know or understand that product line). Most of them are being rescued from the landfill. Might have to spend a crap ton over your budget, like 5-10x over, but you will get those specs.

Look at an r430 barebones, no cpu/ram and build from there using spec sheets from Dell on what it takes. I was able to get one for $400 3 years back, even came with 16gb of ram and a single 10 core Xeon e5-v3.

Also, what are you doing that need these kinds of specs? Running more than 10 VMs at once? Cloud gaming? Form follows function.

“67 hemi cuda!”

Only downside is Reolink encodes in hvec. Frigate handles it fine, but be aware that viewing may be an issue. I’d still buy more Reolink cameras though.

Already have a 3-2-1 backup of the config folders and compose files, and I have backups of the VM if anything goes south. Making sure my logic train was on the right path.

I knew nothing about hosting a service to the public. Cloudflare tunnels helped simplify it for me. It looks more complicated than it is.

Webpage loads are slow, especially images, netboot is a bit slow. I’m sure it’s i/o bottleneck and that everything is running in docker containers. I could probably optimize things a bit better, I just don’t have that kind of time for these projects, and getting an old dell micro would be faster than what I have. but they don’t run on PoE+ that I know of.

I have a cluster of four running all off a single switch, incredibly convenient.

I have three Raspberry Pi 4 4gb and 1 Pi 4 8gb at my disposal, and I still have moments where the thing I need to do will hiccup, or be slower than usual. The Pi 5 has been said to be two times as fast, which is plenty for me. just with the price all in of over $100, curious if anyone else has a better option/opinion

Power over Ethernet. Sorry, read it over three time for spelling, didn’t catch that I never gave the acronym meaning.